WirEng DroneAnt-Ref Directional Antenna for Autel EVO Max 4T/DJI Mavic
This is the ultimate high-gain directional antenna designed to greatly enhance the capabilities of Autel EVO Max 4T Smart Controller V3 drones and DJI Mavic series drones. Also used when RF interference may cause loss of control of your Autel Robotics EVO Max 4T/DJI Mavic.
Country of manufacture – USA
4900,00 €
Available on backorder
Set directional antenna with vhigh gain
DroneAnt-REF
This is a high gain directional antenna kit designed to greatly expand the capabilities of the Autel Robotics EVO Max 4T controlled by the Smart Controller V3. To increase communication range, reliability, operational stability, battery life and immunity from external interference.
– can be used in critical situations where RF interference may cause you to lose control of your Autel Robotics EVO Max 4T.
– splash proof, so it can be used on boats and in harsh weather conditions like heavy rain, snow, etc.
– also recommended for stabilizing your EVO Max 4T, provides a strong and reliable signal on any at what altitude and operating distance, with longer battery life as an added benefit as the drone’s transmitter will be unobstructed to operate at maximum transmission power.
– compatible with the Smart Controller V3 because it supports all its frequencies and operating modes.
– includes an all-stainless steel WirEng® marine reflector and lever for strict radiation compliance and ease of installation.
– comes with an extended WirEng® 2-year warranty.
Main Features
• DroneAnt-REF has high directivity and high front-back ratio.
• Available with standard (ABS fairing) or industrial/military (FRP fairing)
• Unrivaled performance Ultra-Wide Extended Band (Ultra wide extended range) to dramatically increase the range
• Super high gain at all operating frequencies dronea (effective amplification up to 21.4 dBi, isotropic decibel)< /span>
• Sealed and protected from moisture (also suitable for marine environments)
• High-quality fairings made of ABS plastic with anti-UV treatment (FRP for industrial version)
• Stainless steel reflector for increased gain and F-B ratio
• High power consumption (up to 2 x 150 W continuously)
• Extended operating temperature range from -55° to +125° C (FRP version)
• 24K gold-plated N-type connectors on fairings
• Full support for anti-jamming frequency hopping technology
• Ultra-low SWR from 550 MHz to 6000 MHz
• Full support for Frequency Hopping Spread Spectrum (FHSS) modality
• Class IP67 (protection against dust, strong water jets and waves)
• UL94 V-0 flammability rating
• Current trademarks of the USA and other countries
• US and international patents pending
Basic Directional Charts
Technical characteristics
WIRENG DroneAnt-REF antennas
Range of operating frequencies of the antenna system – from 500 to 6100 MHz
Mixed wave polarization +/- 45°
Nominal resistance of the antenna< /strong> 50 Ohm
Acceptable antenna resistance range 45-78 Ohm
Signal gain 19.3 – 23.8 dBi
SWR ( 525-6000 MHz) (Voltage Standing Wave Ratio Range) 1:1 to 1:2.8 Difference
Intermodulation IM3: -156 dBc
Width of the beam of the antenna system in the vertical plane of half power 35 – 41°
Width of the beam of the antenna system in the horizontal plane of half power 42 – 53°
Dome Material (Antenna Fairing Material) ABS/FRP
Main material of internal elements Alloy
Material of bolts/nuts/washers/fasteners < /span>Stainless. steel
Shield material Stainless. steel
Color Light white
Wind resistance 125 km/h
Antenna operating temperature range -25 to 85 °C
Storage temperature range -35 to 115°C
Environmental conditions for telecommunication equipment: ETSI EN 300 019-2-4
Connector type: HF-type N connector
Antenna mounting type: vertical pole (pole diameter from 20 mm to 40 mm)
Antenna system flammability rating for fairing: UL94 V-0
Antenna system protection marking: IP67 protected from dust, strong jets of water, waves
Weight 5.5 kg
Dimensions of the assembled antenna 117 x 67 x 54 cm
Applicable markets Worldwide
Warranty 1 year
